Task

  1. Download the file named Registration Server Packet tracer from
  2. Save the above file as StudentID_Firstname_ITC560.pkt(where “StudentID” is your Student ID and “Firstname” is your first name)
  3. Take a screenshot for every step given below, then save and label in the file you created in step2
  4. Add a registration server and set it up for an IoT network:

i Add a registration server

  1. Place the Generic server onto the workspace and connect it to the home gateway
  2. Find the Generic server in the End Devices Selection box and drag it to the workspace (Select End Devices -> Generic Server)

ii Connect the Registration Server

Using a Copper Straight Through cable, connect the server to the Wireless Router through the cable internet and cable modem

iii Enable the registration server service

Click the Registration Server in the workspace to open the Registration Server configuration window. Click the Services tab and then click the IoT service in the left pane. Click the “On” button to enable the service

iv Configure the registration server

a Click the Config tab. In the Global Settings window, change the Display Name to StudentID_Name_IoT Registration Server (your studentID and your name followed by Registration Server) and change the DHCP/DNS IPv4 setting from the default Static to DHCP

b Verify that the server has received an IPv4 address from the Home Gateway by clicking the Desktop tab and then the IP Configuration icon. (my server IP address is 209.185.220.3, yours could be different). Please note your IP address for your server. Close the Registration Server window

  1. Register Tablet to the Registration Server

i Click the Tablet icon to open the Config tab. Select Wireless tab from left. Enter HomeNetwork for SSID. Then select WPA2-PSK and enter PSK Pass Phrase as Student ID. AES is automatically chosen for Encryption. If not select AES from drop down menu

ii Click the Web Browser icon in the Desktop tab. Enter the IPv4 address of the Registration Server in the URL box and then click Go

iii Because there is no IoT account created yet, one will need to be created. Click the Sign up now option

iv Select a username (your StudentID) and password (your StudentID) and then click Create to create the IoT account (it is a requirement that you use your StudentID for both username and password)

v No devices show up under the URL box as we have not set up an IoT Server – Devices window there are no IoT devices listed. This is because all the devices are still registered with the Home Gateway

  1. Set up Wireless Router at home

i Select Config tab then Settings tab on the left. Set Display Name as StudentID Wireless Router

ii Select Wireless tab from left. Enter HomeNetwork for SSID. Then select WPA2-PSK and enter PSK Pass Phrase as Student ID. AES is automatically chosen for Encryption. If not select AES from drop down menu

iii Follow 6.ii for all end devices (IoT) connected to the wireless router

1.Configure the Ceiling Fan to register with your Registration Server

2.Click the Ceiling Fan icon in the workspace to open the device configuration window

3.Click the I/O Config tab -> Network Adapter -> choose PT-IOT-NM-1W(This is a wireless network adapter)

iii. Next Config tab

1.Select Wireless tab from left. Enter HomeNetwork for SSID. Then select WPA2-PSK and enter PSK Pass Phrase as Student ID. AES is automatically chosen for Encryption. If not select AES from drop down menu (as in 6.ii)

2.Select Setting tab from the left, under the Config tab. Set Display Name as Smart Ceiling Fan. Set Gateway/DNS IPV4 to DHCP. Change the IoT Server type from Home Gateway to Remote Server. Enter the IP address of the StudentID_Name_IoT Registration Server and the created IoT account Username (Student ID) and Password (Student ID). Next, click the Connect button. Once connected you will see the Refresh button

3.Now do step 5.i, you should be able to see the ceiling fan listed under your URL once you log in with username StudentID and password StudentID

4.Configure the lamp in the same was as in step 7. Set up the display name as Smart Lamp

5.Configure the door in the same way as step 7. Set up the display name as Smart Door

6.Now click on the Tablet -> Web browser -> Type IP address of the StudentID_Name_IoT Registration Server. Log in with your Username and password as set. You should be able to see the lamp and the door listed below.

7.Now change the fan setting from off to low

8.Change the door setting to lock

iii. Set the lamp setting to dim

  1. Go to each device and select the Attribute tab and take a screenshot
  2. Add and Configure Temperature Monitor
  3. Add and Configure Wind Detector
  4. Add 2 more end devices for a smart home of your choice and configure
  5. Now click on the Tablet -> Web browser -> Type IP address of the StudentID_Name_IoT Registration Server. Log in with your Username and password as set. You should be able to see the Temperature Monitor and the Wind Detector listed below:
  6. Change the Wind Detector set
  7. Note the Current Temperature under Temperature Monitor

iii. Do step 10.iv (Attributes screenshot)

  1. Change from Real Time to Simulation mode (you can use Shift + S if required)
  2. Select Simple PDU
  3. Select the source as Tablet and destination as Remote Server

iii. Select Auto Capture/Play under Play Controls

  1. Watch the Simulation Panel
  2. Note the Type (ICMP/IoT TCP/TCP/HTTP….)
  3. Click on Info (for 2 or 3 types) next to Type (the Info might be in different colours when In Progress or failed and is green when Successful). Take screenshot(s) of the OSI layers functionality for 2 to 3 Info. Take screenshot(s) of Inbound /Outbound PDU details for 2 to 3 Info

vii. Press the Delete button to remove the PDU from the network

viii. Exit Simulation mode to go to Real time mode

  1. Change from Logical view to Physical view
  2. Select Environments for Home City and select View/Edit
  3. Select KeyFrame Graph, note the Ambient Temperature and take a screenshot

iii. Move the Ambient Temperature from current temperature on the graph and take a screenshot

  1. Switch back to Logical view
  2. Go to the Tablet and Enter the URL as before and note all the devices and their properties
  3. Embed the StudentID_Firstname_ITC560.pktas an object and display as an icon in the Word document
  4. For each step (from Step 4 onwards) screenshots should be taken and included in your Word document
  5. References should be included

Rationale

This assessment consists of six questions covers the following learning objectives:

  • be able to explain and demonstrate various components of Internet of Things (IoT);
  • be able to analyse the role and importance of IoT in the modern world;
  • be able to investigate and propose various requirements of IoT for real world applications.

Marking criteria

The assessment will be marked using the following criteria:

Criteria HD DI CR PS
Packet Tracer Basics Complete Understanding and able to implement all the steps. Screenshots explaining all the steps. Comprehensive understanding and able to implement all the steps. Screenshots explaining all the steps. Good understanding and able to implement all the steps. Some screenshots explaining all the steps. Some screenshots missing. Partial understanding and able to implement all the steps. Few screenshots explaining all the steps.
Set and Configure IoT Devices Complete Understanding of all IoT devices and able to set and configure and implement all devices. Screenshots explaining all the steps. Comprehensive Understanding of all IoT devices and able to set and configure and implement all devices. Screenshots explaining all the steps. Good understanding of all IoT devices and able to set and configure and implement all devices. Some Screenshots explaining all the steps. Some screenshots missing. Partial understanding of IoT devices and able to set and configure and implement all devices. Few screenshots explaining all the steps.
Simulation and Real time IoT Home Network Complete understanding of all IoT devices simulate with both simple and complex PDU. Screenshots explaining all the steps. Comprehensive understanding of all IoT devices simulate with both simple and complex PDU. Screenshots explaining all the steps. Good understanding of all IoT devices simulate with both simple and complex PDU. Screenshots explaining all the steps. Some screenshots missing. Partial understanding of IoT devices simulate with both simple and complex PDU. Few screenshots explaining all the steps.
 Possible Marks (%) 85 – 100 75 – 84 65 – 74 50 -64

NB All your work must be cited (CSU APA), otherwise up to 100% of marks can be deducted. All answers must be written in your own words. Copying sections of text from other sources, even if referenced, is plagiarism and is considered Academic Misconduct.

Presentation

Your assessment should be submitted in either MS Word or PDF format (PDF usually preserves the formatting, MS Word may not – submit ONLY one). Do not submit your assignment in any other format and also do not submit multiple copies of the assessment. Use A4 page size with Times New Roman/Arial/Calibri font and use font size 11 or 12. Please include a title, your student ID and name with your submission.  Your name should also be included as a footnote, with page numbers in your document. The Assignment should be submitted on Turnitin.

References – You MUST use the CSU APA referencing style for all cited material you have used in your work (use in-text citations). You must use primary sources (ie Wikipedia is not acceptable, something you thought up yourself, because you think you know better, is also unacceptable – unless it has been published and peer reviewed, but then it would still need to be cited). All answers must be written in your own words. Copying sections of text from other sources, even if referenced, is plagiarism and is considered Academic Misconduct.

Leave a Reply